LetLetLet ~ Warplanes
Let Let Let - Warplanes => Aircraft Modeling => Topic started by: Jicehem on October 15, 2015, 12:20:13 PM
-
Hello,
This kit is the result of search on a very mysterious bird: the Bf 109 H the prototype of which this kit represents.
That was originally one of the 50 standard Bf 109 G-3 (WNr 16281 with Skz SP+EB) on which a DB 628 V engine has been mounted. To counteract the increase of engine power, the fin and rudder assembly had been enlarged.
Some tell that it was part of the Me 209 H programm but its official designation is Bf 109 H V1. I personally suppose that it was also called Bf 109 V49.
The build is a mix of two kits: Revell's 1/48 G-10 mainly for fuselage and Otaki's G-6 for the wings. The engine cowlings and spinner have been scratch-built as were the vertical surfaces. After having been drawn in 1/48 scale on a white paper, markings have been photocopied on transparent decal.
Camouflage is that of a standard Bf 109 G-3 in RLM 74, 75 and 76 colors.
1) (http://i47.servimg.com/u/f47/10/07/63/16/01_san10.jpg)
2) (http://i47.servimg.com/u/f47/10/07/63/16/02_mes11.jpg)
3) (http://i47.servimg.com/u/f47/10/07/63/16/messer27.jpg)
4) (http://i47.servimg.com/u/f47/10/07/63/16/messer29.jpg)
5) (http://i47.servimg.com/u/f47/10/07/63/16/05_san11.jpg)
Jicehem :-wave
-
Outstanding conversion work!
-
:-ok
-
Marvelous!
-
Hello :-salut
Thank you all.
I must tell that no photographs of that plane are known. The model has been reconstructed after three flight reports abd some engine cowlings profiles found in the Daimler-Benz's archives. This is the reason why there is a doubt upon the real shape of the rudder because a figure shows two possibilities: the one that I've made and another with a rounder shape as on the following profile:
(http://i21.servimg.com/u/f21/10/07/63/16/pn-60210.jpg)
Jicehem :-wave
-
Doubt or not, you did your best, I know you and how you work :-clap :-ok
-
Doubt or not, you did your best, I know you and how you work :-clap :-ok
It's very kind of you.
Jicehem :-wave