Author Topic: Messerschmitt Bf 108 b  (Read 32774 times)

Offline modellius

  • Sr. Member
  • ****
  • Posts: 2532
    • View Profile
Re: Messerschmitt Bf 108 b
« Reply #30 on: July 27, 2019, 12:17:25 AM »
Thank you friends for your words, means a lot to me !

In the meantime, I made some progress, the wheel bays are poor on this kit, so I had a think a lot what to do to make it a bit better. First I made the whole new '' floor '', the next trouble was the canvas, so I took a deep breathe and try something new, made some canvas from Milliput, don't know yet is it good or not, first I will sand it a bit and then apply a surfacer too see what am I done ( this is still the raw condition without the sanding ) , so we will see is the kit going in to the trash can ( hope not ) or to continue.....

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23158
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Messerschmitt Bf 108 b
« Reply #31 on: July 27, 2019, 06:00:08 AM »
You could cement real canvas there, some extra fine, you would get faster and better results

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Messerschmitt Bf 108 b
« Reply #32 on: July 27, 2019, 09:09:40 AM »
Nice work mate.
For the use of miliput, there is a tip: you put miliput where needed then with a Q-tip humidified with water you can work on it to diminue the thickness and have less sanding to do...

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23158
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Messerschmitt Bf 108 b
« Reply #33 on: July 27, 2019, 09:37:57 PM »
Extract from original old photo show fabric or maybe even leather, so smooth surface. So there was no need for any fabric imitation. Maybe this wire on rim... but, you say this is relaxing build?

Offline modellius

  • Sr. Member
  • ****
  • Posts: 2532
    • View Profile
Re: Messerschmitt Bf 108 b
« Reply #34 on: August 06, 2019, 09:16:40 AM »
Yes, you are right, but I did find a photo on the net, from a book, of the original bird and it is "heavy " canvas in the wheel bay, so I think both are right..... And Yes, a relaxing project...... Well it started like that but you know me....... Update of the conopy, playing with miliput again

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Messerschmitt Bf 108 b
« Reply #35 on: August 06, 2019, 05:33:50 PM »
:-ok

Offline modellius

  • Sr. Member
  • ****
  • Posts: 2532
    • View Profile
Re: Messerschmitt Bf 108 b
« Reply #36 on: August 30, 2019, 02:28:31 AM »
This should be a relaxing project but it's not, I'm loosing interest in this one slowly, but I want to finish it and get over it so it goes slow......Very, very slow..... A lot of trouble in the nose section, lot of gluing again, putty, sanding, details, glue, putty, sandpaper, details and it went over and over again..... Tail section is completed and preparing for Surfacer, the last one I do hope so.....

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23158
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Messerschmitt Bf 108 b
« Reply #37 on: August 30, 2019, 05:34:13 AM »
Now you see that job of review kits is not easy, need to do kit fast and almost perfect ;) I did two of this kit for review...

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Messerschmitt Bf 108 b
« Reply #38 on: August 31, 2019, 08:47:38 PM »
Not easy but can be a good personal challenge...