LetLetLet ~ Warplanes

Let Let Let - Warplanes => Combat Warplanes => Topic started by: No.1 on October 22, 2007, 05:08:12 PM

Title: RA Insignia?
Post by: No.1 on October 22, 2007, 05:08:12 PM
Santino and other Italian members- could you help with this document?
Title: Re: RA Insignia?
Post by: santynus on October 22, 2007, 05:44:56 PM
this document speak about color, dimension and positon on the fusolage of the Fascio Littorio
Title: Re: RA Insignia?
Post by: No.1 on October 22, 2007, 06:02:43 PM
Grazie  :-ok Any detailed translation?
Title: Re: RA Insignia?
Post by: santynus on October 22, 2007, 06:22:32 PM
tomorrow I try to translate all the document...  :-/ :-think :-wave
Title: Re: RA Insignia?
Post by: santynus on October 24, 2007, 01:25:52 PM
I tried to translate all the document... :-/ sorry for all the mistake and wrong sentence...  :-red

Ministry of aeronautics

Form orders n.6

February 25, 1927 - year V. (fift year of fascist era...)

Beam fascist aircraft

To date from 1 March  All aircraft in use or load on Offices responsible

(squadrons, airfields, etc.). Shall be fitted with beam fascist

The beam rods will be painted in yellow gold and dark gray shades with silver;

All enclosed in a circle at the bottom of dark gray lead

With the diameter of:

Cm.50 for this specialties: night bombing, daytime bombing, bombing or float plane and blimps;
Cm.35 for other specialties.

It will be painted, for the specialty night bombing, on the front and on both sides of the Cockpit:

For the specialties: daytime bombing, reconnaissance and terrestrial fighter on both sides of the fuselage at about one meter edge of output;
For the various specialties of seaplanes on both sides of the hull forward design of the pilot;
For blimps on both sides of the bow of the boat pilots.

The Directorate General of genius is responsible for providing the issue Appropriate provisions to departments for application on the device and existing aircraft manufacturers such as the application of it on new aircraft.

Title: Re: RA Insignia?
Post by: No.1 on October 25, 2007, 05:25:35 PM
That's great mate  :-ok